HAX 6000
HAX-6000 originates from a class H circuit, with a staggering 2880 Watts power output per channel at 2 ohms. It features an inbuilt crossover with frequency control and a processor to enhance the audio output of your sub woofers. The intelligent cooling system enhances the reliability during your shows and keeps the vital components at an optimal temperature. Full copper transformer provides unmatched power output. Frequency control knob offers control from 20Hz to 150Hz cut off for sub woofer operation. Input is via XLR or 6.3mm jack through the multi input option at the rear panel.
| Program Power (Stereo)* | 2×2880W @2Ω, 2×2400W @4Ω, 2×1440W @8Ω |
|---|---|
| Rated Power (Bridge) | 3000W @8Ω |
| Damping Factor | >1000 |
| Smart Protections | DC, Short Circuit, Over Heat, Clip, In/Out Overload |
| Cooling | 4× Force cooling fans |
| Input Sensitivity | 0.775V / 1V / 1.4V |
| Frequency Response | 20Hz – 20kHz |
| S/N Ratio – Slew Rate | >90dB / 40Vµs |
| Input Connectors | 2× FXLR, 2× MXLR socket for signal input |
| Power Supply | 220V AC ±10% ~ 50Hz |
| Output Connectors | 2× Speakon NL4 socket & Binding Posts for speaker output |
| Dimensions (MM) | 485W × 455D × 135H |
| Weight | 36Kg |
Precision-dependent volume controls.
4 LED bar (power, signal, limiter & protect) for each channel.
Power on/off switch with circuit protector, easy-to-carry front handles.
Rear Panel Shows:
Input connectors – 2× MXLR & 2× FXLR sockets.
Output connectors – 2× Speakon sockets and 2× Binding post terminals for both channels.
Sensitivity selector switch (0.77V / 1.4V).
Operating mode switch (stereo / parallel / bridge).
Crossover switch (low pass / by pass) for each channel with low-frequency tone control.
